YILMAZ SC 550P User Manual page 28

Remove the connection parts of cutting set in the right order.
8.2.5
8.2.6 Remove the saw carefully
8.2.7 Mount the saw by being sure that the rotation direction onto the axle is true.
Replace all removed parts in the same order.
8.2.8
8.2.9 By holding the M10 Allen screw by 8mm Allen switch and the saw axle simultaneously by 17 switches tighten in
the direction of clockwise.
8.2.10 The saw selection should be made proper to EN 847-1 Standard.
. (PICTURE 10 NO 23/25/26)
47