YILMAZ SC 550P User Manual page 24

7.1.7 Adjust the reducer speed adjustment screw (See Figure-11) by rotating in the direction of clockwise until
providing the desired progress if the saw group cutting progress is fast. Make the opposite of the above action if the
saw group cutting progress is slow.
7.1.8 According to the type and shape of the material to be cut it can be adjusted by controlling the clamp speed.
Ensure that the pneumatıc clamps are outsıde the cuttıng range of the saw blade after adjustıng the
. (PICTURE 12)
desıred angle
FIGURE-12
43