Table of Contents
Advertisement
User manual
3.2
Applying changes of configuration changes
All changes made within the TDX Service Tool need to be saved to the
SD memory card located inside the headend unit.
This is done by:
1.
Making the required changes in the individual TDX Service
Tool windows.
2.
Pressing the Submit button on the TDX Service Tool where
the configuration changes have been made.
3.
Pressing the Apply button upper right-hand corner of the
TDX Service Tool window. The Apply button is coloured
'Red' if there are configuration changes waiting to be saved
to the SD memory card. 'Uncoloured' indicates that all
submitted changes have been applied.
4.
It is not necessary to press the Apply button after each configuration
action or use of the Submit button. The Apply button must, however,
be pressed to save the configuration action(s) to the SD card.
WARNING
All unsaved changes will be lost in case of a power cut
Click the apply + save button to save changes
9
EN
Advertisement
Table of Contents
