Table of Contents
Advertisement
5.2
Configuration
Network ID
Enter the required network ID in the
Network ID field. If it is an open network,
the network ID has to follow the "ETSI TR
101 211" guidelines. If it a closed
network you can determine the ID
yourself.
Network name
Enter a network name in the Network
name field. The maximum number of
characters you can enter in the
field is 255.
Set original ID
To change the default values of the
original network ID, click Set original ID
checkbox to enable the Orig. network ID
field.
Original network ID
Enter the required original network ID in
the Orig. network ID field.
NIT standard
Select which standard you want to use,
DVB or Nordig. By default DVB is
selected.
EIT information
The Event Information Table (EIT) drop-
down list enables you to change the EIT
settings for both DVB-T and DVB-C.
5.3
EIT information
Basically, the drop-down list gives you at choice between using a barker channel or using all outputs for transmitting EIT information.
By using a barker channel all EIT information, i.e. actual present/following and actual schedule EIT for all services, will be transferred from the
individual outputs to the barker channel thereby making more room/ payload available to the transmission of services.
NOTE:
If you use a barker channel to carry the EIT information
you have to make sure that the set-top boxes used by
end-users are NorDig compliant, i.e. they can read a
Linkage Descriptor from a NIT.
To use a barker channel for transmitting all EIT information, select
"Barker channel" in the EIT drop-down list. Below the EIT drop-down
list, select the channel you want to use as barker channel in the drop-
down list.
EN
24
User manual
Advertisement
Table of Contents
