D. Samsung DRM / LYNK server
Samsung LYNK and SINC server installation are NOT supported by TRIAX. If support is needed, please contact Samsung support.
TRIAX will however help retrieve a server license from Samsung.
1. Prerequisites & setup
Setup TDX Simulcrypt
•
TDX should be connected to the CAS System – see
installation
•
TDX input signal should be good quality
•
User must have valid license(s)
•
The TDX configuration port has to be in the same VVLAN
as the CAS server, - if the CAS server has IP 10.10.85.1,
then the TDX has to be set up to 10.10.85.xx
•
Software, version 4.2.x.xxxx or newer
•
"4180xx – Samsung DRM" Licence
•
Configure Simulcrypt as described in
chapter A and B
•
Configure services to be scrambled
CAS system ID
•
As shown in the CAS server Simulcrypt settings w/o zeroes/end. Ie. 0x4AFC000 is 0x4AFC
•
Panaccess: 0x4AFC / Samsung: 0x112
EMM server port
•
As defined in the CAS server. Default: 5000
ECM server IP adress
•
IP adress from the CAS server
ECM server IP port
•
As defined in the CAS server.
Panaccess: 12500 / Samsung: 9999
Setup LYNK (DRM) / SINC server
•
Hardware – Dual core 2GHz / 4GB RAM / 100GB HD
•
Software required
- Windows 2008 server or newer / Win7 can be used for
test
- Java Runtime Environment – JRE (latest version)
- Tomcat (ver. 6,7, or 8)
- Samsung LYNK / SINC software
2. Configure TDX and CAS system settings
•
Purchase and enter the Samsung DRM license
•
Configure CAS settings
- CAS ID: 0x112 (Samsung DRM)
- EMM port: default port "5000"
- ECM server: IP address of LYNK server
- ECM port: default port "9999"
•
These CAS settings must be provided form the person
installing the LYNK server
EN
NOTE
•
Enter relevant information in "CAS system settings" from
TDX Admin options window.
•
Enter mandatory fields in the Service tool, as shown in
example.
•
Click OK and apply
•
Prepare a server running the operating system needed
•
Install Samsung CAS server (LYNK)
•
Configure Samsung Cas server
•
Install SINC server
•
Configure SINC server
34
User manual