2.12 DiskOnChip Address Setting
The HS-6036 provides a U17 socket for install the DiskOnChip
module.
A JP8(1-4) may select the starting memory address of the
DiskOnChip (D.O.C.) to avoid the mapping area with any other
memory devices. If you have another extra memory devices in the
system with the same memory, neither the HS-6036 nor the extra
memory devices will function normally. Please set both at different
memory address mapping.
JP8(1-4) : DiskOnChip Address Select
Memory Address Mapping
D000
D800
*) : default setting
The D.O.C. function allows the system to run without FDD nor HDD.
The D.O.C. may be used as drive C: or drive A: User may also
easily use the DOS's commands such as FORMAT, SYS, COPY,
XCOPY, DISCOPY and DISKCOMP etc. This means that the
D.O.C. may be used as drive A if the system is without FDD-A for
ambient application. Please contact your supplier for different
D.O.C. module sizes.
18
OFF
E000
E800
OFF
1-2
3-4
ON
ON
ON
ON
OFF
OFF