Vga Driver Install For Win 2000 - Boser HS-6036 User Manual

5.3 VGA DRIVER INSTALL FOR WIN 2000

1. Click the Start button, then go to Setting and click on Control
Panel.
3. Click on Display icon to start the Display Properties Window.
4. Click on the Settings tab, and then click on Display Type.
5. In the Change Display Type window, click on "Have Disk".
6. Specify the path to the new driver and press the <ENTER>key.
(if in driver A:, type a:\nt40)
SiS 300/305
Select
7. Click OK or press Enter
8. You will see warning panel about Third Party Drivers. Click on
Yes to finish the installation.
9. Once the installation is completed, the system must shut down
and restart for the new driver to take effect.
After restart, checking on the VGA driver, the properties of the driver
should look similar to the following figure.
50