Wlan Module - HP ProDesk 400 G7 SFF Maintenance And Service Manual

To install the speaker, reverse the removal procedures.

WLAN module

To remove the WLAN module, use these procedures.
Table 4-3 WLAN module descriptions
Description
Intel Wi-Fi 6 AX201 ax 2×2 + Bluetooth 5 non-vPro WW
Intel Wi-Fi 6 AX201 ax 2×2 + Bluetooth 5 vPro WW
Realtek RTL8821CE ac 1×1 + Bluetooth 4.2 WW
Realtek RTL8822CE ac 2×2 + Bluetooth 5 M.2 2230 WW
The WLAN module is located near the memory modules.
NOTE: WLAN module appearance can vary.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the optical drive
4. Remove the front bezel
5. Release the drive cage
Remove the WLAN module:
1. Disconnect the antenna cables from the module (1).
NOTE:
antenna cable labeled 2/AUX connects to the WLAN module Aux terminal.
2. Remove the screw (2) that secures the module to the computer.
ENWW
(Access panel on page
(Optical drive on page
(Front bezel on page
(Drive cage on page
The WLAN antenna cable labeled 1/MAIN connects to the WLAN module Main terminal. The WLAN
(Preparation for disassembly on page
21).
22).
23).
29).
21).
WLAN module 35