Cleaning The Monitor; Cleaning The Mouse - HP ProDesk 400 G7 SFF Maintenance And Service Manual

If you remove a key, use a specially designed key puller to prevent damage to the keys. This tool is
●
available through many electronic supply outlets.
IMPORTANT:
improperly removed or installed, the keyboard might not function properly.
You can clean under a key with a swab moistened with isopropyl alcohol and squeezed out. Be careful not
●
to wipe away lubricants necessary for proper key functions. Use tweezers to remove any fibers or dirt in
confined areas. Allow the parts to air dry before reassembly.

Cleaning the monitor

Use this information to properly clean the monitor.
● Wipe the monitor screen with a clean cloth moistened with water or with a towelette designed for cleaning
monitors. Do not use sprays or aerosols directly on the screen; the liquid can seep into the housing and
damage a component. Never use solvents or flammable liquids on the monitor.
To clean the monitor body, follow the procedures in
●

Cleaning the mouse

Use this information to properly clean the mouse.
Before cleaning the mouse, be sure that the power to the computer is turned off.
Clean the mouse ball by first removing the retaining plate and the ball from the housing. Pull out any debris
●
from the ball socket and wipe the ball with a clean, dry cloth before reassembly.
● To clean the mouse body, follow the procedures in
ENWW
Never remove a wide leveled key (like the space bar) from the keyboard. If these keys are
Cleaning the computer case on page
Cleaning the computer case on page
16.
16.
Routine care 17