Electrostatic Discharge Information; Generating Static Electricity - HP ProDesk 400 G7 SFF Maintenance And Service Manual

Table of Contents

Advertisement

Electrostatic discharge information

A sudden discharge of static electricity from your finger or other conductor can destroy static-sensitive devices
or microcircuitry. Often the spark is neither felt nor heard, but damage occurs.
An electronic device exposed to electrostatic discharge (ESD) might not appear to be affected at all and can work
perfectly throughout a normal cycle. The device might function normally for a while, but it has been degraded in
the internal layers, reducing its life expectancy.
Networks built into many integrated circuits provide some protection, but in many cases, the discharge contains
enough power to alter device parameters or melt silicon junctions.
IMPORTANT:
observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Before touching an electronic component, discharge static electricity by using the guidelines described in this
section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.

Generating static electricity

This table shows how humidity affects the electrostatic voltage levels generated by different activities. A product
can be degraded by 700 V.
Different activities generate different amounts of static electricity.
Static electricity increases as humidity decreases.
Table 3-1
Static electricity occurrence based on activity and humidity
Event
Walking across carpet
Walking across vinyl floor
Motions of bench worker
Removing DIPs (dual in-line packages) from plastic tube
Removing DIPs from vinyl tray
Removing DIPs from polystyrene foam
Removing bubble pack from PCB (printed circuit board)
Packing PCBs in foam-lined box
Multiple electric components can be packaged together in plastic tubes, trays, or polystyrene foam.
12
Chapter 3 Routine care, SATA drive guidelines, and disassembly preparation
To prevent damage to the device when you are removing or installing internal components,
Relative humidity
55%
40%
7,500 V
15,000 V
3,000 V
5,000 V
400 V
800 V
400 V
700 V
2,000 V
4,000 V
3,500 V
5,000 V
7,000 V
20,000 V
5,000 V
11,000 V
10%
35,000 V
12,000 V
6,000 V
2,000 V
11,500 V
14,500 V
26,500 V
21,000 V
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents