1.
Press the drive cage release button (1) to allow the drive cage to be released.
2.
Swing the drive cage (2) up and toward the front of the system chassis.
To secure the drive cage, reverse the release procedure.
Hard drive
To remove the hard drive, use these procedures.
Table 4-2
descriptions, hard drive
Description
2 TB, SATA, 7200 RPM, 3.5 in hard drive
2 TB, SATA, 5400 RPM, 7.0 mm hard drive
1 TB, SATA, 7200 RPM, 3.5 in hard drive
1 TB, SATA, 7200 RPM, 9.5 mm hard drive
500 GB, SATA, 7200 RPM, 3.5 in
500 GB, SATA, 7200 RPM, 7.0 mm
500 GB, SATA, 7200 RPM, 7.0 mm, FIPS
500 GB, 7200 RPM, 7.0 mm, SED, Opal2
Grommets, hard drive
NOTE:
Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you
can transfer the data to the new hard drive.
Before removing the hard drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the access panel
30
Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page
21).
21).
ENWW