HP ProDesk 400 G7 SFF Maintenance And Service Manual page 39

3. Remove the optical drive
4. Remove the front bezel
5. Release the drive cage
Remove the hard drive:
1. Release the hard drive power and data cables from the retention clips (1) and (2) built into the drive cage.
2. Disconnect the hard drive power cable (3) and data cable (4) from the system board.
3. Pull the release lever outward (1).
4. While pulling the release lever outward, slide the drive to the left (2) until it stops, and then remove the
hard drive from the drive cage.
ENWW
(Optical drive on page 22).
(Front bezel on page 23).
(Drive cage on page 29).
Hard drive 31