Solid-State Drive - HP ProDesk 400 G7 SFF Maintenance And Service Manual

Solid-state drive

To remove the solid-state drive module, use these procedures.
Table 4-4 Solid-state drive module descriptions
Description
1 TB, M.2 2280, NVMe, SuperSpeed (SS) solid-state drive with triple layer cell (TLC)
512 GB, M.2 2280, PCIe, NVMe, SS solid-state drive with TLC
512 GB, M.2 2280, PCIe-3×4, self-encrypting drive (SED) solid-state drive with TLC
512 GB, M.2 2280, PCIe, NVMe, value solid-state drive
256 GB, M.2 2280, PCIe, NVMe, SS solid-state drive with TLC
256 GB, M.2 2280, PCIe-3×4, SED solid-state drive with TLC
256 GB, M.2 2280, PCIe, NVMe, value solid-state drive
128 GB, M.2 2280, PCIe, NVMe solid-state drive with TLC
16 GB, M.2 2280, PCIe-3×2, NVMe solid-state drive with TLC
256 GB, M.2 2280, PCIe + 16 GB 3D solid-state drive
512 GB, M.2 2280, PCIe, NVMe + 32 GB 3D solid-state drive
Before removing the solid-state drive module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the optical drive
4. Remove the front bezel
5. Release the drive cage
Remove the solid-state drive module:
1. Remove the screw that secures the drive (1).
ENWW
(Preparation for disassembly on page
(Access panel on page
(Optical drive on page 22).
(Front bezel on page 23).
(Drive cage on page 29).
21).
21).
Solid-state drive 37