Speaker - HP ProDesk 400 G7 SFF Maintenance And Service Manual

9. Install four 6-32 silver-and-blue mounting screws in the adapter bracket (two on each side of the bracket).

Speaker

To remove the speaker, use these procedures. A single speaker is located on the left side of the computer behind
the front bezel, inside the chassis. It is secured by a white peg that you pull out to release.
Before removing the speaker, follow these steps:
1. Prepare the computer for disassembly
2. Remove the access panel
Remove the speaker:
1. Disconnect the speaker cable from the system board (1).
2. Release the speaker from the rubber retention clips (2) built into the system chassis.
3. Remove the speaker (3).
34 Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page 21).
21).
ENWW