Introduction; Product Feature And Specifications - Connect Tech Quark NGX004 User Manual

INTRODUCTION

Connect Tech's Quark platform brings a low cost deployable Jetson solution to the market. The Quark's
design includes 2x Gigabit Ethernet, 1 x USB 3.1 (Gen 2) Type C with OTG support, 2 x MIPI CSI-2, Camera
I2C Control, 6x GPIOs, 2x PWM, 3x UART, 1x CAN, 2x I2C, 1x SPI.

Product Feature and Specifications

Feature
Module Compatibility
Mechanical Dimensions
USB Camera
MIPI Cameras
Camera Control Interface 1x I2C (Can be used for Lens Control)
Internal Debug Ports
Storage
IO – Ethernet
IO – USB OTG
IO – UART Debug
IO – UART
IO – CAN
IO – I2C
IO – SPI
IO – GPIO / PWM
Power – RTC Battery
Operating Temperature
Weight
Warranty and Support
Document: CTIM-00084
Revision: 0.04
NVIDIA® Jetson Nano™ (PRODUCTION MODULE
NVIDIA® Jetson Xavier™ NX
82.6mm x 58.8mm (3.25" x 2.31")
1x USB 3.1 Gen 2 (Connector: USB Type-C)
2x 2-lane MIPI CSI-2
Connector: 1-1734248-5
15-pin FPC 1mm Pitch Connector
•
Same MIPI connector used on Nano Dev Kit
•
1x UART for Debug (I/O header)
1x SD Card Slot
2x 10/100/1000BASE-T Uplink
1x USB 2.0 OTG for Flashing Capability (Type C)
1x Debug UART (I/O header)
2x UART (I/O header)
1x CAN bus (I/O header) – Supported by Jetson Xavier™ NX only
2x I2C bus (I/O header)
1x SPI bus (I/O header)
8x GPIO (I/O header) – 1x PWM Capable
3-Pin RTC Battery Connector (Rev C and onwards)
-25°C to +85°C (-13°F to +185°F)
33 Grams (1.16oz)
1 Year Warranty and Free Support
Page 6 of 24
www.connecttech.com
Description
ONLY)
Quark Carrier
Users Guide
Date: 2020-12-15