Reset & Recovery Pushbutton; Led Indicators - Connect Tech Quark NGX004 User Manual

Reset & Recovery Pushbutton
Description
The Quark Carrier implements a dual functionality pushbutton for both Reset and Recovery of the
platform. To Reset the module, simply press and hold the pushbutton for a minimum of 250
milliseconds. To put the Jetson module into Force Recovery mode, press and hold the pushbutton for a
minimum of 10 seconds.
Function
Location SW1
Type
Panasonic EVQP7 Pushbutton
Carrier Part Number: EVQ-P7A01P
Connector
Manufacturer: Panasonic
Reset Button
Minimum 250ms (typ.)
Press
Recovery Button
Minimum 10s (typ.)
Press
Note: A full power cycle of the system must be performed after module flashing.

LED Indicators

Description
The Quark Carrier implements an LED (D4) for power status indication as follows:
Function
Location D4
Type Green LED
Carrier Part Number: APHHS1005CGCK
Connector Manufacturer: Kingbright
Function
Power LED
D4
Document: CTIM-00084
Revision: 0.04
Description
Description
LED
Page 17 of 24
Quark Carrier
Users Guide
www.connecttech.com
Date: 2020-12-15