Patlite WD-Z2 Series Installation Manuallines page 46

WD-Z2 Series Installation Guidelines Rev.5
② If a Fixed CSV file name is selected for "CSV output":
Select "Common
(file name)"
Select "Do not
divide"
(2-2) WDT-5LR-Z2/WDT-6LR-Z2 power settings and signal tower information format
In WDS-AUTO2, the WDT monitoring status ("0", "9") output is exported as CSV data to the signal wire
information string specified in the transmitter's power settings.
Therefore, when the CSV output is set in (2-1), it is necessary to set one of the signal wires as the
transmitter's power settings in WDS-WIN01.
For the WDT-5LR-Z2/WDT-6LR-Z2, refer to "Reference 9: Using WDT-5LR-Z2/WDT-6LR-Z2 in
WDS-AUTO2" to set the appropriate power settings.
Set 2-10 for CSV
format as shown in
the diagram.
- 46 -