Notes When Migrating To Wds-Win01 - Patlite WD-Z2 Series Installation Manuallines

WD-Z2 Series Installation Guidelines Rev.5

(2) Notes when migrating to WDS-WIN01

Only if the migration is from WDS-AUTO2 to WDS-WIN01, and the visualization application in the
customer's system configuration is not changed, note the following.
a． (2-1) CSV file output method
b． (2-2) WDT-5LR-Z2/WDT-6LR-Z2 power settings and signal tower information format
(2-1) CSV file output method
Check the diagram below and configure the settings in conjunction with the "CSV output" settings for the
WDS-AUTO2.
① If an Auto-generate CSV file name is selected for "CSV output":
"Common"
"Divide by date"
Set 2-10 for CSV
format as shown in
the diagram.
- 45 -