Register The Wdt "Username - Patlite WD-Z2 Series Installation Manuallines

WD-Z2 Series Installation Guidelines Rev.5

(2) Register the WDT "username"

- The following explains the settings in WDS-WIN01 to associate the equipment name with the
transmitter's MAC address for each equipment.
In the MAC address field marked in red, enter the transmitter MAC address for each equipment in the "Kit
Sheet", and in the User name field, register the equipment name from the "Target Equipment Investigation"
sheet.
(2-2) Set the receiver's connection destination.
Set up the information of the receiver to connect with, based on the LAN network settings in the
"Receiver Kit" sheet.
Note
- 34 -