Initial Receiver Setup - Patlite WD-Z2 Series Installation Manuallines

WD-Z2 Series Installation Guidelines Rev.5

(2) Initial receiver setup

① Hardware Configuration
When using with the USB connection
Maintenance PC
WDS
- Configuration Table
Item
WDR (for operation)
WDS
AC Adaptor
Maintenance PC
LAN Cable (cross cable) *1 *2
USB Cable *3
*1 Connect with a LAN cable when configuring the WDR LAN settings.
*2 Use a cross cable when connecting the WDR directly to the maintenance PC via LAN cable.
*3 Do not connect LAN and USB cables at the same time.
WDR (for operation)
USB Cable
Number of configuration items
Number as required
When using with the LAN connection
Maintenance PC
WDS
Browser
WDR-L-Z2 / WDR-LE-Z2
WDS-WIN01/WD-Z2-specific system
1
settings
1 Included in the Startup Kit
1
1
1 Included in the Startup Kit
- 18 -
WDR (for operation)
HUB
AC Adaptor
LAN Cable
Models
-
-