Patlite WD-Z2 Series Installation Manuallines page 28

WD-Z2 Series Installation Guidelines Rev.5
(2-1-3) Receiver Direction
◎ Horizontal, with the cover facing downward
(2-1-4) Adverse effect of the material used in the receiver installation location
If the receiver is mounted on an H-beam pillar, the metal construction will cause reception to be
unstable, even if the receiver is placed in the center of the area.
Select an installation location where the targeted equipment aligns with the front side of the
receiver (the side that is not in contact with the metal face).
As an alternative, select a location as shown in (2) Receiver Installation, "ƒ\ Radio reception with the receiver
installed on a wall in the center of the area [○ Good]".
○ Wall-mounting
- 28 -