Patlite WD-Z2 Series Installation Manuallines page 23

WD-Z2 Series Installation Guidelines Rev.5
(1-3) Verify Operation
- The product's status indicator lamp can be used to determine the wireless communication status.
- After installation is complete, turn on the main power supply to the equipment and with all the signal tower
lamps off, check the transmitter indicator lamp, verifying that it is not in the off state. If the indicator lamp
does not turn on, the power supply wiring to the transmitter is not correct.
- The indicator lamp operates as follows:
Indicator Lamp
Green pulse
Orange pulse
Red pulse
Red light
Wireless Connection Status
Indicates a good status.
The connection is not good; however, it can still be used.
The wireless connection is not good.
Product is waiting to join a WD Network.
- 23 -