Wd-Z2 Installation Kits - Patlite WD-Z2 Series Installation Manuallines

WD-Z2 Series Installation Guidelines Rev.5
2.

WD-Z2 Installation Kits

Below is a list of the items included in each installation kit and their description.
Item
Startup Kit Receiver
(with AC adaptor)
Receiver for setup
(without AC adaptor)
Body unit for setup
Body Unit
AC adaptor for the
body unit
AC Adaptor
Transmitter
Bracket for LME
Bracket for LE
USB Cable
Customer
Registration Guide
Setup Kit
Body unit for setup
Body Unit (for LR)
Mounting bracket
Conversion cable
AC Adaptor (100 to 240 VAC)
Receiver for standard operation use.
Used when configuring the initial settings of the
transmitter in locations such as the office. Also serves
as a spare receiver in the event the main receiver
fails.
Used when configuring the transmitter settings. Can
also be used as a 4-contact transmitter by connecting
a push-button switch, or other switches to the back of
the connector.
*Refer to reference 2 for details on the connector.
Supplies power to the body unit when used to setup.
(100 VAC, for Japan only)
Transmitter for standard operation use in combination
with the LME or LE bracket.
φ60 Bracket for attaching the transmitter to the LME
series signal tower. Included with the WDT-6M-Z2.
φ50 Bracket for attaching the transmitter to the LE
series signal tower. Included with the WDT-5E-Z2.
Setup cable for connecting the receiver to a PC.
The customer is required to register (for Japan only).
When registered, the customer can download
-
manuals and software packages and can request the
"Radio Wave Environmental Investigation Service" for
use in conjunction with the Startup Kit.
Used when configuring the transmitter settings.
For setting up the WDT-6LR-Z2 and WDT-5LR-Z2.
A fixture used to enable the body unit to stand by itself
during setup.
A conversion cable used during setup when
connecting the AC adaptor and the body unit.
For use in North America, Europe, and other areas for
supplying power to the body unit, Setup Kit, and
WDR-LE-Z2 during setup. Free-range power supply.
- 4 -
Description
Signal Tower
Compatibility
LE / LME LR
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
No Yes
No Yes
No Yes
Yes Yes