Check Transmitter/Receiver Connections And .Csv Log File - Patlite WD-Z2 Series Installation Manuallines

WD-Z2 Series Installation Guidelines Rev.5

(3) Check transmitter/receiver connections and .csv log file

Two lists are displayed; the receiver list appears in the WDR Information window (as shown below), and
the transmitters are displayed by their receiver in the WDT Information window. Check that all receivers
and transmitters are connected, then check that the transmitters are connected to their designated
receivers.
When clicking "CSV file destination", the CSV file can be opened as read-only for checking.
This completes the initial system operation check.
Establish a test operation period of at least one week and check the
operation log data to ensure proper setup.
- 35 -