Get Sdr Repository Info; Reserve Sdr Repository Command; Table B-15 Netfn 0X0A, Cmd 0X20; Table B-16 Netfn 0X0A, Cmd 0X22 - ABACO VMICPCI-7055 Hardware Reference Manual

B.1.16 Get SDR Repository Info
This command returns the SDR command version for the SDR Repository.

Table B-15 NetFn 0x0A, Cmd 0x20

B.1.17 Reserve SDR Repository Command
This command is used to set the present 'owner' of the repository, as identified by the 'Software ID' or
by the Requester's Slave Address from the command. The reservation process provides a limited
amount of protection on repository access from the IPMB when records are being incrementally read.

Table B-16 NetFn 0x0A, Cmd 0x22

62 VMICPCI-7055/CPCI-7055RC Hardware Reference Manual
Byte
Request- -
data
Response- 1
data
2
3
4
5:6
7:10
11:14
15
Byte
Request-data -
Response- 1
data
2
3
Value Data Field
-
00h Completion code
51h SDR Version.
XXh Record count LS Byte.
XXh Record count MS Byte.
XXXXh Free space in bytes. LS
Byte first. 000h
indicates 'full' FFFEh
indicates 64KB-2 or
more, FFFFh indicates
'unspecified'.
0000000 Most recent addition
0h timestamp. LS Byte
first.
0000000 Most recent erase
0h (delete or clear)
timestamp. LS Byte
first.
02h Operation Support
[7] – Overflow flag =1
Value Data Field
-
00h Completion Code.
XXh Reservation ID, LS
Byte.
XXh Reservation ID, MS
Byte.
Comments
Add SDR or Partial-
Add SDR command
not supported, always
returns 00000000.
Delete SDR or Clear
SDR command not
supported, always
returns 00000000.
Only Reserve SDR
Repository command
supported.
Comments
Publication No. 500-657055-000 Rev. G