Get Self-Test Results; Table B-4 Netfn 0X06, Cmd 0X04 - ABACO VMICPCI-7055 Hardware Reference Manual

B.1.4 Get Self-Test Results
This command returns the results of the Power-On Self Test.

Table B-4 NetFn 0x06, Cmd 0x04

Publication No. 500-657055-000 Rev. G
Byte
Request- -
data
Response- 1
data
2
3
Value Data Field
-
00 Completion code
55h No error. All Self-Tests Passed.
56h Self-Test not implemented in
57h this controller.
58h Corrupted or inaccessible data
FFh or devices.
All other Fatal hardware error.
Reserved.
Device-specific 'internal' failure.
XXh If byte 2 is 55h, 56h or FFh, then
00h.
If byte 2 is 58h or All other, then
device specific.
If byte 2 is 57h, then Self-test
error bit field. 1b means 'failed',
0b means 'unknown'.
[7] 1b = cannot access SEL
device
[6] 1b = cannot access SDR
repository
[5] 1b = cannot access FRU
device
[4] 1b = IPMB signal lines do not
respond
[3] 1b = SDR repository empty
[2] 1b = Internal use area of FRU
corrupted
[1] 1b = controller update 'boot
block' firmware corrupted
[0] 1b = controller operational
firmware corrupted
Comments
IPMI Firmware and OEM Extensions 53