Cold Reset; Warm Reset; Table B-2 Netfn 0X06, Cmd 0X02; Table B-3 Netfn 0X06, Cmd 0X03 - ABACO VMICPCI-7055 Hardware Reference Manual

B.1.2 Cold Reset
This command performs a "Cold Reset" of the IPMI subsystem. This causes default setting of interrupt
enables, event message generation, sensor scanning, threshold values and other "power up default"
states to be restored.

Table B-2 NetFn 0x06, Cmd 0x02

B.1.3 Warm Reset
While there are two commands, one for a cold reset, and one for a warm reset, the firmware does not
distinguish between them and always performs a cold reset.

Table B-3 NetFn 0x06, Cmd 0x03

52 VMICPCI-7055/CPCI-7055RC Hardware Reference Manual
Byte
Request-data -
Response- 1
data
Byte
Request- -
data
Response- 1
data
Value Data Field
-
00 Completion code
Value Data Field
-
00 Completion code
Comments
Comments
Publication No. 500-657055-000 Rev. G