Get Device Guid Command; Table B-7 Netfn 0X06, Cmd 0X08 - ABACO VMICPCI-7055 Hardware Reference Manual

B.1.7 Get Device GUID command
This command returns a Globally Unique ID (GUID) for the management controller. The format of the
ID follows that specified in Attachment A of the Wired for Management Baseline, Version 2.0 specification.
The ID can be used to uniquely identify an instance of a management controller. This information can be
used in conjunction with the SDR information to verify that a particular controller is still present in the
system.

Table B-7 NetFn 0x06, Cmd 0x08

56 VMICPCI-7055/CPCI-7055RC Hardware Reference Manual
Byte
Request-data -
Response-data 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Value Data Field
-
00h Completion code
XXh node
XXh node
XXh node
XXh node
XXh node
XXh node
XXh clock seq low
XXh clock seq high and
reserved
XXh time high and version
XXh time high and version
XXh time mid
XXh time mid
XXh time low
XXh time low
XXh time low
XXh time low
Comments
MS byte
MS byte
MS byte
MS byte
MS byte
Publication No. 500-657055-000 Rev. G