Front/Rear Panel Connectors - ABACO VMICPCI-7055 Hardware Reference Manual

1.8 Front/Rear Panel Connectors

28 VMICPCI-7055/CPCI-7055RC Hardware Reference Manual
The VMICPCI-7055/CPCI-7055RC provide front panel access for both PMC
expansion sites, one Gigabit Ethernet port, one serial port, the manual reset
switch and the status LEDs. A drawing of the VMICPCI-7055/CPCI-7055RC front
panels are shown in Figure
labeled as follows:
LAN0 Gigabit Ethernet port LEDs
2/1 Gigabit Ethernet ports status LEDs
(LAN1 and LAN2 rear I/O)
COM0 COM0 Serial Port LEDs
RST Manual reset switch
S Status LEDs
R Reset LED
P Backplane Power LED
The VMICPCI-7055/CPCI-7055RC provide rear I/O support for the following:
COM1, COM2, PMC I/O for one expansion site and IDE. These signals are
accessed using the VMIACC-7055/ACC-7055RC RTMs, which terminate into
industry standard connectors.
The front panel connectors, including connector pinouts and orientation, for the
VMICPCI-7055/CPCI-7055RC are defined in Appendix A.
Rear panel connections are defined in the appropriate RTM Installation Guide.
Contact Sales for compatible RTMs offered by Abaco.
1-7. The front panel connectors and indicators are
Publication No. 500-657055-000 Rev. G