Picmg 2.16 Ethernet; Picmg 2.9 Support - ABACO VMICPCI-7055 Hardware Reference Manual

3.2 PICMG 2.16 Ethernet

3.3 PICMG 2.9 Support

38 VMICPCI-7055/CPCI-7055RC Hardware Reference Manual
The VMICPCI-7055/CPCI-7055RC support three 10/100/1000 Ethernet LANs.
10BaseT, 100BaseTX, and 1000BaseT options are supported via a front panel RJ45
connector and through a PICMG 2.16 or CompactPCI J3 backplane connection
(the PICMG 2.16 and the CompactPCI J3 are option dependent). Contact Sales for
ordering information.
NOTE
The system backplane must support the PICMG 2.16 specification, and a PICMG 2.16 compatible switch
is required for each Ethernet channel.
The VMICPCI-7055/CPCI-7055RC provide a Zircon PM peripheral management
controller that supports a subset of IPMI 1.5 commands via PICMG 2.9. Refer to
Appendix B for details of the IPMI capabilities of the onboard peripheral
management controller.
NOTE
IPMI is no longer supported. Older boards may have IPMI.
Publication No. 500-657055-000 Rev. G