Table of Contents
Advertisement
B • IPMI Firmware and OEM Extensions
The IPMI firmware provides all the mandatory standard commands specified in the IPMI 1.5
framework. The firmware also provides functionality beyond that of a normal Peripheral Manager, by
implementing several commands in the OEM range (per IPMI spec).
NOTE
IPMI is no longer supported. Older boards may have IPMI.
B.1 Standard IPMI Commands
The Abaco IPMI firmware implements all "Required" commands for a Peripheral Manager per the IPMI
1.5 spec, as well as some of the "Optional" commands.
B.1.1 Get Device ID
This command is used to retrieve the Intelligent device's Hardware Revision, Firmware/Software
Revision, and Sensor and Event Interface Command specification revision information.
Table B-1 NetFn 0x06, Cmd 0x01
1. Depends on the version of firmware installed on the board.
2. Depends on the type of device.
Publication No. 500-657055-000 Rev. G
Byte
Request-data
-
Response-data
1
2
3
4
5
6
7
8:10
11:12
2
Value
Data Field
-
00
Completion code
00
Device ID
00
Device Revision
Firmware Revision
1
02
byte 1
Firmware Revision
1
11
byte 2
51
IPMI Version
2b
Additional device
support
CO 33 00
Manufacturer ID
0878
Product ID
Comments
Unspecified
Unspecified
Firmware revision 1.08
IPMI version 1.5
The following bits are
set:
[5] IPMB Event
Generator
[3] FRU Inventory
Device
[1] SDR Repository
Device
[0] Sensor Device
IPMI Firmware and OEM Extensions 51
Advertisement
Table of Contents
