Hardware Installation - Advantech PCI-1752 Quick Start Manual

Step 3: Select the DLL Drivers option.
Step 4: Select the Windows 95/98 or Windows NT option according
to your operating system. Just follow the installation instruc-
tions step by step to complete your DLL driver setup.
For further information on driver-related issues, an online version of
DLL Drivers Manual is available by accessing the following path:
Start/Programs/Advantech Driver for 95 and 98 (or for NT)/Driver
Manual

2.3 Hardware Installation

Note:
✎ Make sure you have installed the driver first before you install the card
(please refer to Section 2.2 Driver Installation)
After the DLL driver installation is completed, you can now go on to
install the PCI-1752/54/56 card in any PCI slot on your computer. But it
is suggested that you should refer to the computer user manual or
related documentations if you have any doubt. Please follow the steps
below to install the card on your system.
Step 1: Turn off your computer and unplug the power cord and cables.
TURN OFF your computer before installing or removing any
components on the computer.
Step 2: Remove the cover of your computer.
Advantech Co., Ltd.
www.advantech.com
Fig. 2-2 Different options for Driver Setup
– 9 – PCI-1752/54/56 User's Manual
Chapter 2