Graco Informer G3000 Instructions Manual page 28

Setup Screens
Setup Screen Screen 6 6 6
Setup Setup Screen
Use this screen to set your date format, date, and
time.
Figure 11 Setup Screen 6
Enter the screen to set or change
preferences.
Press to activate a field for editing or
to accept the highlighted selection on a
dropdown menu.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Select your preferred date format from
the dropdown menu.
MM/DD/YY
DD/MM/YY
YY/MM/DD
Set the current date.
Set the current time.
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
28
Key
Key Key
Setup Screen Screen 7 7 7
Setup Setup Screen
Use this screen to enter a password that will be
required to access the Setup screens. This screen
also displays the software version.
Figure 12 Setup Screen 7
Enter the screen to set the password.
Press to activate the field for editing.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Enter desired password. Enter "0000" to
disable the password.
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
Key Key Key
3A2040H