Installation; Overview - Graco Informer G3000 Instructions Manual

Fluid monitoring kits

Hide thumbs Also See for Informer G3000:

Table of Contents

Installation

The purpose of the Informer Display Control Module

is to collect and display fluid data. The Informer

connects the output signal from a meter to a display

module that performs the following functions:

• Shows real-time fluid flow rate.

• Displays a resettable batch totalizer.

• Monitors and reports overall fluid use.

• Alarms if the flow rate is too fast or too slow for

the user-set targets.

• Alarms when the maintenance total is reached for

the user-set target.

• Displays a log of the last 20 alarms.

The Informer is available in configurations for

Hazardous Location or Non-Hazardous Location

installation. The power supply for Hazardous

Locations comes with one barrier, to power one

Informer. Up to three additional barriers can be

added to the power supply to power three additional

Informers. See

Accessories, page

additional barriers and Informer Modules.

33, to order

3A2040H

Table of Contents