Graco Informer G3000 Instructions Manual page 40

Appendix B - Advanced Web Interface
K-Factor K-Factor K-Factor
In this screen section, view or adjust the k-factor for
the system's meter. See
Device Device Name Device Name Name
In this screen section, type a name in the field to help
you differentiate Informers, if you are using more
than one.
Events
Events Events
In this screen section, view or adjust the alarm
settings and backlight timer. Use the dropdown
menus to toggle between On
maintenance alarm, flow alarm, and auto clear. For
the backlight timer, type a number in the field to
correspond to the number of minutes the display can
be idle before it turns off the backlight to save power.
40
Meter Calibration, page
On and Off On Off for the Off
Modbus Modbus Modbus
In this screen section, view the modbus mode,
17. address, baud rate, and parity. Modbus information
must be adjusted on the Informer. If you were to
adjust it on your PC, the change would cause a
disruption in your connection.
Date and Date Date and Time and Time Time
In this screen section, view or adjust the date format,
date, or time. Use the dropdown menu to select a
new date format, if desired. For date and time, type
the correct information in the field.
3A2040H