Table of Contents
Advertisement
Background Mode
Under split mode V 1/2, there is subclassification V 2In/2 Out based on numbers of source.
Background Source
Slelect the source for background.
H Total, V total
Set total height and total width for the splicing output display.
Height 1
Set the height of the first output display.
FLEX4ML show the parameters required based on the Split mode, for example, if the split mode is V 1/3.
the Width 1 (width of first output display )and Width 2 (width of second output display) shall be set; if
the split mode is Cross, Height 1 and Width 1 will be shown to set.
Background Details
To Scale and Crop the background.
Save Setting
Save Setting to confirm above
FLEX4ML
Width
height
H POS
V POS
Save Setting
Reset Parameters
User Manual
4096
2304
0
0
17
Advertisement
Table of Contents
