List Of Cables And Parts - Omron AnyFeeder Series Integration Manual

Chapter 4: System Installation
1. Mount the SmartController and Front Panel.
2. Connect the Front Panel to the SmartController.
3. Connect the pendant (if purchased) to the SmartController.
Connect a jumper plug, if no pendant is being used.
4. Connect user-supplied 24 VDC power to the controller.
Refer to the SmartController EX User's Guide.
5. Install a user-supplied ground wire between the SmartController and ground.

List of Cables and Parts

Part Cable and Parts List
A eAIB XSYS Cable
B User E-Stop, Safety Gate
C XUSR Jumper Plug
D Front Panel
E Front Panel Cable
F Front Panel Jumper Plug 10053-000
G XMCP Jumper Plug
H T20 Bypass Plug
J T20 Adapter Cable
K T20 Pendant (option)
L AC Power Cable
M 24 VDC Power Cable
N1 24 VDC, 6 A Power Sup-
ply
N2 24 VDC, 6 A Power Sup-
ply
P RS232 Cable to
AnyFeeder
Q Ethernet Cable, to
SmartController
R Ethernet Cable, to
SmartVision MX
S Ethernet Switch
(optional)
T Camera and cable
Part #
13323-000
n/a
04736-000
90356-10358
10356-10500
04737-000
10048-000
10051-003
10055-000
04118-000
04120-000
a
04536-000
04536-000
n/a
n/a
n/a
n/a
n/a
AnyFeeder Integration Guide - Page 22
Part of:
Notes
standard, eAIB
n/a user-supplied
13323-000 SmartController EX
standard
90356-10358 standard
13323-000 SmartController EX
13323-000 SmartController EX
10055-000 standard, T20
10055-000 standard, T20
option
90565-010 user-supplied/option
90565-010 user-supplied/option
or user-supplied
90565-010 04536-000
AnyFeeder AnyFeeder
n/a user-supplied
n/a user-supplied
n/a user-supplied
n/a user-supplied