List Of Cables And Parts - Omron AnyFeeder Series Integration Manual

Chapter 4: System Installation
The pendant is an option, and may not be present in your system. This figure includes the
optional T20 pendant.

List of Cables and Parts

Open the Accessory box and locate the eAIB XSYSTEM cable. Connect the cables and peri-
pherals as shown in the preceding figure. Parts and steps are covered in the following two
tables.
Part Cable and Parts List
A eAIB XSYSTEM Cable Assembly
B User E-Stop, Safety Gate
C XUSR Jumper Plug
D Front Panel
E Front Panel Cable
F Front Panel Jumper Plug
G XMCP Jumper Plug
H T20 Bypass Plug
J T20 Adapter Cable
K T20 Pendant (option)
L AC Power Cable
M 24 VDC Power Cable
N1 24 VDC, 6 A Power Supply
N2 24 VDC, 6 A Power Supply
P RS232 Cable
Q Ethernet Cable -> eAIB or eMB-
40/60R
R Ethernet Cable -> SmartVision MX
S Ethernet switch (optional)
T Camera and cable
U AnyFeeder Servo Cable
V 24 VDC, 10 A Power Supply
X 8 mm OD Air Line
a: Only one 04536-000 power supply comes with the 90565-010 kit.
The XUSR, XMCP, and XFP jumpers intentionally bypass safety connections so you can test
the system functionality during setup.
Part #
13323-000
n/a
04736-000
90356-10358
10356-10500
10053-000
04737-000
10048-000
10051-003
10055-000
04118-000
04120-000
04536-000
04536-000
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
AnyFeeder Integration Guide - Page 18
Part of: Notes
standard, eAIB
n/a user-supplied
13323-000 standard, eAIB
standard
90356-10358 standard
13323-000 standard, eAIB
13323-000 standard, eAIB
10055-000 standard, T20
10055-000 standard, T20
option
90565-010 or user-supplied
90565-010 or user-supplied
a
or user-supplied
90565-010 or user-supplied
AnyFeeder
n/a user-supplied
n/a user-supplied
n/a user-supplied
n/a user-supplied
AnyFeeder
n/a user-supplied
n/a user-supplied