After-Season Maintenance And Storing - SaMASZ TWIST 600 Instruction Manual

Comb side-delivery rake
Table of Contents

Advertisement

WARNING!
Service, repair and maintenance works can only be performed after having
turned off the drive, shut down the engine and taken out the ignition key.
When carrying out such works, exercise particular caution and avoid contact
of oil with skin.

6.3. After-season maintenance and storing

At the end of the season clean, wash and dry the rake, and when the machine is dry, carefully
grease working surfaces.
Moreover:
touch up the paintwork,
check the hydraulic assembly for tightness, and if any leaks are present, seal or replace non-tight
parts with new ones,
for longer period of the machine storing in a non-roofed area clean cylinder rods and apply
grease on their surface.
The dismounted machine should be stored in a standstill position, so it is supported on
protected support feet (Fig. 19). It is recommended to store the set on a paved ground, preferably in
dry, roofed places, inaccessible to unauthorized personnel (mainly children). Store the machine in a
dry place, and if exposed to precipitations, apply lubrication regularly.
After storing period:
make sure that all nuts and screws are tightened properly,
apply grease where necessary,
check pressure in tires.
Operator's Manual
Fig. 19. Correct position of storing of the machine
- 19 -
Comb Side-Delivery Rake TWIST 600

Advertisement

Table of Contents
loading

Table of Contents