To detach a work head, follow the same steps, position the machine on an even ground and
turn the vehicle's drive on. Then disconnect the push-in fittings and loosen bolts in mounting holder.
NOTE:
The carrier is equipped with a set of hydraulic push-in fittings for quick work head mounting
and demounting.
5.3.
Preparing the machine for transport
To prepare the machine for transport do the following:
lift the machine approx. 0.2m above the ground;
remove support feet (A) (Fig. 9);
check whether rotary arm is secured with pin (S) (Fig. 5), otherwise – secure the arm with pin;
if the carrier has circular saw or branch trimmer mounted on, protect the sharp edges.
5.4.
Moving the extension arm with mowing head from transport to working position
The Fisher carrier enables operation in side and central position.
Operator's Manual
Fig. 9. Attaching work head to the carrier
- 14 -
Carrier with hydraulic extension
FISHER