Nice M3BAR Instructions And Warnings For Installation And Use page 77

ADDENDUM - PARAMETER LEGEND
Parameter
Radio channel 1
Radio channel 2
Radio channel 3
Radio channel 4
Suction cup
Parameters of output OU4 (with accessory xba7)
24 V warning light
OGI
Boom closed
Boom open
Courtesy light
Parameters of output OU4 (with accessory xba8)
Red traffic light
Green traffic light
One-way traffic light
Alternate one-way traffic
light
Pedestrian traffic light
Description
Activates the output when command 1 is sent with the transmitter, the command sent to the control unit is
ignored
Output active 24 V DC / max 10 W
Activates the output when command 2 is sent with the transmitter, the command sent to the control unit is
ignored
Output active 24 V DC / max 10 W
Activates the output when command 3 is sent with the transmitter, the command sent to the control unit is
ignored
Output active 24 V DC / max 10 W
Activates the output when command 4 is sent with the transmitter, the command sent to the control unit is
ignored
Output active 24 V DC / max 10 W
Activates when the boom is closed: at the start of an opening manoeuvre, the output deactivates and
opening starts after the "Suction cup time" has elapsed
Output active 24 V DC / max 10 W
Light flashing during the manoeuvre (0.5 seconds on, 0.5 seconds off)
Light off: boom closed
Slow flashing: opening manoeuvre
Fast flashing: closing manoeuvre
Light on: boom open
Light on: boom closed
Light off: boom in other positions
Light on: boom open
Light off: boom in other positions
Light lit for the entire duration of the manoeuvre; after the manoeuvre, it remains lit for a duration
corresponding to the courtesy light time
Slow flashing: closing manoeuvre
Steady red light: boom closed
Light off: application in other positions
Slow flashing: opening manoeuvre
Steady green light: boom open
Light off: application in other positions
Green light: boom open
Red light: all other cases
For the system to operate in this mode, the commands must be sent to the control unit as follows:
Commands for inside: Input 2 or Loop 1 configured as open
Commands for outside: Input 3 or Loop 2 configured as open
Operation:
an open command sent from inside activates the green light inside and the red light outside, giving priority
to the person inside
an open command sent from outside activates the green light outside and the red light inside, giving
priority to the person outside
When the boom is closed or closing, the light is red on both sides
Boom closed: green light inside, red light outside
Boom open: red light inside, green light outside
Boom in other positions: red light inside and outside
ENGLISH – 77