Installation Warnings; Product Description And Intended Use - Nice M3BAR Instructions And Warnings For Installation And Use

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 51
– The manufacturer declines all liability for damages to
property, objects or people resulting from failure to
observe the assembly instructions. In such cases, the
warranty for material defects shall not apply.
– The weighted sound pressure level of the emission A is
lower than 70 dB(A).
– Cleaning and maintenance reserved for the user must
not be carried out by unsupervised children.
– Before intervening on the system (maintenance,
cleaning), always disconnect the product from the
mains power supply and from any batteries.
– Inspect the system frequently, in particular the cables,
springs and supports to detect any imbalances and
signs of wear or damage. Do not use the product if it
needs to be repaired or adjusted, because defective
installation or incorrect balancing of the automation can
lead to injuries.
– The packing materials of the product must be disposed
of in compliance with local regulations.
– Keep persons away from the gate when it is manoeuvred
using the control elements.
– When operating the gate, keep an eye on the automated
mechanism and keep all bystanders at a safe distance
until the movement has been completed.
– Do not operate the product if anyone is working nearby;
disconnect its power supply before permitting such
work to be done.

1.2 INSTALLATION WARNINGS

– Prior to installing the drive motor, check that all
mechanical components are in good working order
and properly balanced, and that the automation can be
manoeuvred correctly.
– Make sure that the control elements are kept far from
moving parts but nonetheless directly within sight.
Unless a selector is used, the control elements must be
installed at least 1.5 m above the ground and must not
be accessible.
– If the opening movement is controlled by a fire-sensing
system, make sure that any windows larger than 200
mm are closed using the control elements.
– Prevent and avoid any form of entrapment between the
moving and fixed parts during the manoeuvres.
– Permanently affix the label concerning the manual
manoeuvre near its actuating element.
– After installing the drive motor, make sure that
the mechanism, protective system and all manual
manoeuvres function properly.
52 – ENGLISH
2
PRODUCT DESCRIPTION AND
INTENDED USE
M-BAR and L-BAR are electromechanical boom gates for
2

PRODUCT DESCRIPTION AND INTENDED USE

residential and industrial use, which control the opening and
closing of a driveway.
These barriers are equipped with an electromechanical
gearmotor with a 24 V motor, an electric limit switch system and
a warning light incorporated in the cover (optional accessory).
These two models can be installed as counterposed barriers
in the "Master-Slave" mode, to cover the surface of a driveway
exceeding 8 metres (see paragraph "Gearmotor in SLAVE
mode").
The control unit is configured for being connected to the
various devices belonging to the Nice Opera System and to the
"Solemyo" solar power system (see paragraph "Connecting
the Solemyo solar energy system").
The barriers work on electricity and in case of a power outage
(blackout), the boom can be unlocked manually and moved
by hand. Alternatively, it is possible to use the back-up battery
(model PS224 - optional accessory) which ensures that certain
manoeuvres can be carried out in the first few hours of a power
outage. To prolong this period or increase the number of allowed
manoeuvres, it is necessary to activate the "Stand-by" function
(see "Table 6").
The barriers must be combined with the available booms,
individually or in pairs, to reach the desired length. Various
optional accessories are available, depending on the chosen
boom, as shown in the table.
INSTALLABLE ACCESSORIES
Cubicle
Boom
Rubber Lights
3 m
yes
yes
M3BAR
4 m
yes
yes
M5BAR
5 m
yes
yes
5 m
yes
yes
3+3 m yes
yes
M7BAR
3+4 m yes
yes
3+4 m yes
yes
4+4 m yes
yes
L9BAR
4+5 m yes
yes
Important notes for using the manual:
– throughout this manual, the term "boom gate" refers to the two
products "M-BAR" and "L9BAR"
– the accessories mentioned in the manual are optional.
a
Any use of the product other than the intended use
described is not allowed!
Table 1
Aluminium
Mobile support
skirt
-
-
yes (1 piece)
yes
yes (1 piece)
yes
yes (2 pieces) yes
yes (2 pieces) yes
-
yes
yes (3 pieces) yes
yes (3 pieces) yes
-
-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M5barM7barL9bar

Table of Contents