Mitsubishi Electric MELSEC iQ-R Series User Manual page 86

6.
Set the items in "Required Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71LP21-25 (R)]  [Required Settings]
7.
Set the network range assignment as follows and click the [Apply] button.
[Navigation window]  [Parameter]  [Module Information]  [RJ71LP21-25 (R)]  [Required Settings]  [Network
Range Assignment]  [Detailed Setting]
8.
Set the link refresh settings as follows and click the [Apply] button.
[Navigation window]  [Parameter]  [Module Information]  [RJ71LP21-25 (R)]  [Basic Settings]  [Link Refresh
Settings]  [Detailed Setting]
9.
Write the set parameters to the system A CPU module.
[Online]  [Write to PLC]
10.
Click the [Yes] button to write the parameters to the CPU modules of both systems.
11.
Either reset the CPU modules of both systems or power off and on both systems.
3 PROGRAMMING
84
3.2 Program Examples of the Redundant System