Operation After Reconnection; Transmission Speed - Mitsubishi Electric MELSEC iQ-R Series User Manual

Operation after Reconnection

Item Description
Operation after Reconnection Set the station type of when the control station returns.
For details on the functions, refer to the following.
Page 42 Control station return control
Return as Control Station: The control station returns as the control
station of the network again.
Return as Normal Station: While the operating sub-control station
works as the control station of the network, the control station returns
as the normal station of the network again. The station works as the
control station again only when all stations go down and recover.

Transmission Speed

Item Description
Transmission Speed Set the transmission speed for the RJ71LP21-25.
Set 10Mbps or 25Mbps when the station type is set to the "MNET/H
mode" or "MNET/H extended mode", and set 10Mbps when it is set to
the "MNET/10 mode".
Setting range
• Return as Control Station
• Return as Normal Station
Default: Return as Control Station
Setting range
• 10Mbps
• 25Mbps
Default: 10Mbps
2 PARAMETER SETTINGS
2.2 Required Settings
2
59