Generic Terms And Abbreviations - Mitsubishi Electric MELSEC iQ-R Series User Manual

Term
System switching
Tracking cable
Transient transmission

GENERIC TERMS AND ABBREVIATIONS

Unless otherwise specified, this manual uses the following generic terms and abbreviations.
Generic term/abbreviation
Common parameter
Network module
Network parameter
Unique parameter
16
Description
A function which switches the systems between the control system and the standby system to continue operation of the
redundant system when a failure or an error occurs in the control system
An optical fiber cable used to connect two redundant function modules in a redundant system
This function allows communications with other stations when a request is made by a method such as a dedicated
instruction and engineering tool.
Description
A generic term for module parameters for the following settings
• Network range assignment setting
• Supplementary cyclic setting
A generic term for the following modules:
• Ethernet interface module
• A module on CC-Link IE TSN (the RJ71GN11-T2 and a module on a remote station)
• CC-Link IE Controller Network module
• A module on CC-Link IE Field Network (a master/local module, and a module on a remote I/O station, a remote device
station, and an intelligent device station)
• MELSECNET/H network module
• MELSECNET/10 network module
• RnENCPU (network part)
Another name for module parameters
A generic term for module parameters other than common parameters