ASSEMBLY
Tool:
Multi Hex Tool with Phillips
Screwdriver
4.
Computer Installation
Connect the Hand Pulse Sensor Wires (17) and Extension Sensor Wire (12) to the wires
that come from the Computer (11). Tuck wires into the Handlebar Post (4). Attach the
Computer (11) onto the top end of the Handlebar Post (4) with four Cross Recessed Pan
Head Bolts (103) that were removed.
Use the Multi Hex Tool with Phillips Screwdriver to tighten the Cross Recessed Pan Head
Bolts (103) until firm and secure.
13
Need help?
Do you have a question about the Elliptical and is the answer not in the manual?