Installing A Dimm - Intel MX4305UE User Manual

1.3.2 Installing a DIMM

1. Locate the SODIMM socket on the board.
2. Hold two edges of the SODIMM module carefully, and keep away of touching its
connectors.
3. Align the notch key on the module with the rib on the slot.
4. Firmly press the modules into the socket which will automatically snap into the mounting
notch. Do not force the SODIMM module in with extra force as the DIMM module only fits
in one direction.
5. Press down until SODIMM module Mounting Notch clicks in.
Make sure to unplug the power supply before adding or removing
DIMMs or other system components. Failure to do so may cause
severe damage to both the motherboard and the components.
 A DDR4 SODIMM is keyed with a notch so that it fits in only one
direction. DO NOT force a SODIMM into a socket to avoid
damaging the DIMM.
 The DDR4 SODIMM sockets do not support DDR3 SODIMMs.
DO NOT install DDR3 SODIMMs to the DDR4 SODIMM socket.
MX4305UE User's Manual
MX4305UE User's Manual 19