Decimation - Photon Focus MV1-D1024E Series User Manual

4.3.3 Decimation

Decimation reduces the number of pixels in y-direction. Decimation in y-direction transfers
th
every n row only and directly results in reduced read-out time and higher frame rate
respectively.
Decimation can also be used together with ROI or MROI. In this case every ROI
should have a height that is a multiple of the decimation setting. E.g. if decima-
tion=3, then the height of every ROI should be a multiple of 3.
Fig. 4.19 shows decimation on the full image. The rows that will be read out are marked by red
lines. Row 0 is read out and then every n
Figure 4.19: Decimation in full image
Fig. 4.20 shows decimation on a ROI. The row specified by the Window.Y setting is first read
out and then every n
Fig. 4.21 shows decimation and MROI. For every MROI region m, the first row read out is the
row specified by the MROI<m>.Y setting and then every n
m.
MAN064 02/2020 V1.1
th
0 , 0 )
th
row until the end of the ROI.
row.
( x
th
row until the end of MROI region
4.3 Reduction of Image Size
, y )
m a x m a x
33 of 109