Linlog - Photon Focus MV1-D1024E Series User Manual

8 Graphical User Interface (GUI)

8.1.6 LinLog

This tab contains LinLog and Skimming settings.
Figure 8.7: Linlog panel
LinLog
The LinLog technology from Photonfocus allows a logarithmic compression of high light
intensities. In contrast to the classical non-integrating logarithmic pixel, the LinLog pixel is an
integrating pixel with global shutter and the possibility to control the transition between
linear and logarithmic mode (See also the corresponding section in the camera manual.). There
are 3 predefined LinLog settings available. Alternatively, custom settings can be defined in the
User defined Mode.
LinLog Mode: Off: LinLog is disabled. Low/Normal/High compression: Three LinLog
presettings. User defined: Value1, Time1, Value2 and Time2. The Linlog times are per
thousand of the exposure time. Time 800 means 80% of the exposure time.
88 of 109
MAN064 02/2020 V1.1