Decimation (Monochrome Models Only) - Photon Focus MV1-D1312(IE)-G2 User Manual

4 Functionality

4.3.5 Decimation (monochrome models only)

Decimation reduces the number of pixels in y-direction. Decimation can also be used together
with ROI or MROI. Decimation in y-direction transfers every n
reduced read-out time and higher frame rate respectively.
Fig. 4.25 shows decimation on the full image. The rows that will be read out are marked by red
lines. Row 0 is read out and then every n
Figure 4.25: Decimation in full image
Fig. 4.26 shows decimation on a ROI. The row specified by the Window.Y setting is first read
out and then every n
Figure 4.26: Decimation and ROI
Fig. 4.27 shows decimation and MROI. For every MROI region m, the first row read out is the
row specified by the MROI<m>.Y setting and then every n
m.
54
th
0 , 0 )
th
row until the end of the ROI.
0 , 0 )
th
row only and directly results in
row.
( 1 3 1 1 , 1 0 8 1 )
R O I
( 1 3 1 1 , 1 0 8 1 )
th
row until the end of MROI region